xinyuan

NO.

Item

Technical parameters

1

Nominal volume

10L

2

Material

The material of contacting the reactions materials parts: 0Cr18Ni9(SS304)

Because the SS316L couldnot stand the max temp. Of over 400C

3

Design pressure

Max working pressure

30Mpa

25Mpa 

Pls confirm the working pressure suitable to your lab testing

4

Design temperature

Max working temp.

550C

500C

Pls confirm the working temp. suitable to your lab testing

5

Mixing speed

0~1000r/min

6

Motor power

375~550W

7

Heating power

4~6KW

8

Motor connecting type

Vertical drive

9

Heating type

Electrical heating furnace

10

Opening ports on the reactor kettle

Gas phase port with needle valve, liquid phase port with needle valve and dip pipe, temperature measurement and control with platinum resistance, pressure gauge safety blasting with pressure gauge and safety explosion-proof device, reactor cooling coil inlet and outlet with tap.

Because the pressure is too high, pls consider if there’s need to  add solid feed port with plug, if need pls tell us

11

Mixing type

Usually Paddle type

Paddle type, anchor type, impeller type, blade type, turbine type, scraper type or modular type, or choose other types combination according the reaction condition. 

12

Mixing shaft

Adopt self-lubricating wear-resisting bushings, suitable for various media agitation.

13

Seal type

Magnetic seal

14

Discharging type

Upward discharging  from the dip pipe and the bottom discharging valve

15

Control box

Equipped with PID or PLC control box on site

And also can equip with host computer software on-line monitoring, display and control temp. And mixing speed. If need, pls tell us.

Programmed temperature display and control, accuracy ± 1 ℃ (or ±0.1 ℃);

And also can equip with host computer software on-line monitoring, display and control which can achieve:

Programmed temperature display and control, accuracy ± 1 ℃ (or ±0.1 ℃);

Mixing Speed display and control;

Pressure display and control;

Level display and control;

PH display and control;

Flow display and control;

Valve open/close control, etc.

16

Other configurations

Customized design and manufacture, according to different requirements on the kettle cover, reactor body, inner mixing paddles or add additional devices(Such as condensation reflux device, constant pressure feed tank, receiving device, condenser, etc.). We can help customer to achieve their request, and also can equip necessary instruments as request.